What\’s bigger, 1-2 or 3-4? That\’s a tough question to answer. Let\’s look at the numbers a little closer.

1-2 is two numbers, while 3-4 is also two numbers. However, 3-4 is one more than 1-2. So, if we\’re talking about which is bigger, the answer is 3-4.

## 1/2 of 3/4 (one-half of three-forths)

It\’s a common question that we all ask ourselves at some point in time – what\’s bigger, 1 or 2? Is it 3 or 4? The answer may seem obvious, but it\’s actually not as simple as it seems.

The reality is that the size of something is relative. It all depends on what you\’re comparing it to. For example, if you compare 1 to 2, then 1 is obviously smaller.

But if you compare 1 to a mountain, then suddenly 1 seems very large.
This is why it\’s important to be specific when asking this question. What are you trying to compare?

Only then can you accurately determine which number is bigger.

## Which is Bigger 1/2 Or 1/4

When it comes to fractions, the size of the number is determined by the denominator. In other words, a fraction with a larger denominator is always going to be larger than a fraction with a smaller denominator. So, in this case, 1/4 is going to be larger than 1/2.

This can be easily seen when you compare the two fractions visually. For example, if we were to draw both fractions out on a piece of paper, it would look something like this:
As you can see from the above image, 1/4 takes up more space than 1/2.

Therefore, it is safe to say that 1/4 is indeed bigger than 1/2.

## Which is Bigger 1/2 Or 3/8

When it comes to fractions, the size is determined by the number on the bottom, or the denominator. In this case, both fractions have a denominator of 8. However, the numerator, or top number, is what determines the value of the fraction.

In this case, 3/8 is larger than 1/2 because 3 is larger than 1.

## Is 3/4 Bigger Than 1/2 on a Measuring Cup

When it comes to measuring liquids, the size of the container definitely matters. But what about when you\’re using a measuring cup? Is 3/4 bigger than 1/2 on a measuring cup?

The answer is yes, 3/4 is bigger than 1/2 on a measuring cup. This is because the measurements on a measuring cup are in fluid ounces, and 3/4 of a fluid ounce is larger than 1/2 of a fluid ounce.
So, if you need to measure out more liquid than what 1/2 of a fluid ounce can hold, then you\’ll want to use the 3/4 measurement on your measuring cup.

Keep in mind that 1 fluid ounce is equal to 2 tablespoons, so 3/4 of a fluid ounce would be equal to 1 1/2 tablespoons.

## Is 1/2 Bigger Than 1/3

It\’s a common question that we get asked a lot, so today we\’re here to give you the answer! The answer is…

it depends! If you\’re talking about the size of the actual numbers, then yes, 1/2 is bigger than 1/3. But if you\’re talking about the size of the fractions themselves, it\’s a little more complicated.

Let\’s take a closer look.
When we compare fractions, we are really comparing two things: the numerator and the denominator. The numerator is the top number in the fraction, and it represents how many parts of the whole we have.

The denominator is the bottom number in the fraction, and it represents how many parts make up one whole. So when we compare 1/2 and 1/3, we are really comparing 2 (the numerator) with 3 (the denominator). And since 2 is less than 3, that means that 1/2 is actually smaller than 1/3!

But wait – there\’s more! Not only are they different sizes when written out like this, but they would also look different if we were to draw them out. This is because when we reduce a fraction down to its lowest terms (like 1/2 or 1/3), what we\’re really doing is finding out how many equal parts fit into one whole.

So if we drew out 1/2 as two equal parts of something, it would look like this:
And if we drew out 1/3 as three equal parts of something, it would look like this:
As you can see from these examples, even though 2 (the numerator) is less than 3 (the denominator), when these fractions are reduced down to their lowest terms and drawn out visually, 1/2 looks larger than 1/3!

So there you have it – whether or not 1/2 is bigger than 1/3 depends on what you\’re comparing them on. If you\’re just looking at raw numbers written out on paper, then yes – 1/2 appears to be bigger than1 /3 . But if you\’re considering them as fractions representing division problems or drawing them out visually, then no – in those cases ,1 / 2 actually appears to be smaller than1 / 3 !

## Is 1/2 Greater Than 2/3

When it comes to fractions, there is a general rule of thumb that can be used to determine which fraction is larger. This rule states that the fraction with the larger numerator is always going to be greater than the fraction with the smaller numerator. In other words, 1/2 is always going to be greater than 2/3.

There are a few reasons why this rule holds true. First, when you are dealing with fractions, you are essentially dealing with division. The numerator in a fraction represents the number of parts that you are dividing something into, while the denominator represents the total number of parts.

So, if you have more parts in the numerator (1/2), then you are essentially dividing something into more pieces than if you had fewer parts in the numerator (2/3).
Second, another way to look at fractions is as percentages. If you take 1/2 and multiply it by 100%, you get 50%.

Similarly, if you take 2/3 and multiply it by 100%, you get 66%. So, when viewed as percentages, it’s clear that 50% is greater than 66%.
Finally, another way to think about this concept is to consider what happens when both fractions are multiplied by the same number.

If we take 1/2 and multiply it by 3, we get 3/6. On the other hand, if we take 2/3 and multiply it by 3, we get 6/9. As you can see from these results, 3/6 is still less than 6/9 even though both fractions were multiplied by 3.

Therefore, 1/2 must be less than 2/3 overall.

Credit: www.youtube.com

## What Size is Bigger 3 4 Or 1 2?

There is no clear answer to this question as it depends on a number of factors. For example, if you are talking about 3 and 4 objects in terms of length, then 4 is longer than 3. However, if you are talking about 3 and 4 objects in terms of width, then 3 is wider than

4. So it really depends on what you are measuring.

## What is the Bigger 1/4 Or 3 4?

When it comes to fractions, the bigger number is always the one with the larger numerator. In this case, 1/4 is larger than 3/4 because the numerator (1) is larger than the numerator (3) of 3/4.

## What is the ½ of ¾?

If you\’re working with fractions, you might be wondering what the half of three fourths is. To find this value, you\’ll need to use a few different steps.
First, let\’s take a look at what the fraction ¾ actually means.

When we see the fraction ¾, it is telling us that there are three parts total, and that we have four quarters. So another way to think of this fraction is as four quarters out of three wholes.
To find half of ¾, we can first think about what half means.

Half means two equal parts out of a whole, so in order to find half of ¾, we need to divide our three fourths into two equal sections. This gives us the result of 1½ (or one and a half). So the answer to the question \”what is the half of ¾?\” is 1½ .

## Is 3/4 Bigger Or 2 3 Bigger?

It might seem like a simple question, but it\’s one that often trips people up. The answer is actually quite simple: 3/4 is bigger than 2/3. Here\’s why:

When we\’re talking about fractions, the number before the slash (the numerator) represents how many parts we have, and the number after the slash (the denominator) represents how many total parts there are. So in the fraction 3/4, we have three out of four parts, or three-fourths.
In contrast, 2/3 means two out of three parts, or two-thirds.

When we compare these two fractions, we can see that 3/4 is larger than 2/3 because it has more parts.

## Conclusion

When it comes to numbers, the bigger the better, right? Well, that might not always be the case. In fact, when it comes to 1, 2, 3, and 4 specifically, which is bigger?

The answer might surprise you.
Believe it or not, 3 is actually bigger than 4. How can this be?

It all has to do with place value. You see, when you’re looking at a number like 42, the 2 in the ones place has a value of 20. But what about the 4 in the tens place?

That has a value of 40. So when you add them together, you get 60 (20 + 40).
Now let’s look at 35.

The 5 in the ones place has a value of 5. And the 3 in the tens place has a value of 30. When you add them together this time, you get 35 (5 + 30).

See how that works?