Skip to content

How to Remove Smog Pump on Chevy

Warning: DOMNode::insertBefore(): Document Fragment is empty in /home/u933509521/domains/ on line 137

Warning: DOMNode::insertBefore(): Document Fragment is empty in /home/u933509521/domains/ on line 137

If you have a Chevy and need to remove the smog pump, there are a few things you should know. The smog pump is located on the side of the engine, near the firewall. It is held in place by two bolts, which can be removed with a socket wrench.

Once the bolts are removed, the pump can be pulled out of its housing.

Square body air pump and thermal vacuum switch delete

  • Park your Chevy on a level surface and engage the emergency brake
  • Place a jack under the front of the car and lift it until the front wheels are off the ground
  • Remove the negative battery cable from the terminal using a wrench
  • This will prevent electrical shorts while you work on the vehicle
  • Locate the smog pump on the driver’s side of the engine near the firewall
  • The smog pump is usually held in place by two bolts
  • Use a wrench to remove these bolts and take out the smog pump assembly

Tbi Smog Pump Delete

As most people with TBI’s know, the smog pump is required by law in most states. However, many people choose to delete it in order to save weight and money. Here are some things to consider before making this decision:

1. If you live in a state that requires emissions testing, you will need to have the smog pump intact in order to pass. 2. Deleting the smog pump will save you some money on initial installation costs, as well as ongoing maintenance costs. 3. It is estimated that deleting the smog pump will save around 10-15 pounds of weight, which can be beneficial for racing applications.

4. Some engine builders recommend against deleting the smog pump, as it can lead to increased engine wear due to unburned fuel and debris being recirculated through the engine without being filtered out first.

Chevy Smog Pump Eliminator Kit

If your Chevy came with a smog pump, chances are you don’t need it and it’s just taking up space and weighing your engine down. A smog pump eliminator kit is a great way to get rid of that unnecessary pump and free up some space under the hood. The kit comes with all the necessary hardware to install it, as well as detailed instructions.

It’s a fairly simple process that anyone with basic mechanical skills can do in their driveway or garage. Once installed, you’ll notice an immediate difference in both performance and fuel economy. So if you’re looking for a quick and easy way to improve your Chevy’s performance, ditch the smog pump with a eliminator kit.

Removing Smog Pump Chevy 454

If you have a Chevy 454 engine, you may be wondering how to remove the smog pump. This is actually a pretty easy process, and there are only a few steps involved. Here’s what you need to do:

1. Disconnect the negative battery cable. This will ensure that there is no electrical current running through the system while you’re working on it. 2. Locate the smog pump on the engine.

It should be on the driver’s side of the engine, near the front. 3. Unbolt the smog pump from its mounting bracket using a wrench or socket set. There are usually four bolts holding it in place.

4. Pull the smog pump away from the engine and disconnect any hoses or wires that are attached to it. These may include an electrical connector, as well as a vacuum hose. Be sure to label each one so you know where it goes when you reinstall the pump later on.

350 Tbi Air Pump Delete

If you have a 350 TBI engine, you may be wondering if it’s okay to delete the air pump. The answer is yes, you can delete the air pump on your 350 TBI engine without any negative consequences. In fact, deleting the air pump can actually improve your engine’s performance.

Here’s why: The air pump is used to inject air into the exhaust system in order to reduce emissions. However, this injected air also increases backpressure in the exhaust, which can decrease performance.

By deleting the air pump, you’ll eliminate this backpressure and free up some horsepower. In addition, deleting the air pump will also lighten your engine slightly, which can further improve performance. If you’re looking for a way to get a little more power out of your 350 TBI engine, deleting the air pump is definitely worth considering.

Smog Pump Delete Kit

A smog pump delete kit is a simple and relatively inexpensive way to improve the performance of your vehicle. The kit replaces the stock smog pump with a high-flow, low-restriction unit that allows more air to flow through the engine. This can lead to increased power and fuel economy, as well as reduced emissions.

Chevy 350 Smog Pump Delete Belt Size

If you own a Chevy 350 and are looking to do a smog pump delete, one of the first things you’ll need to do is figure out what size belt you’ll need. While there are a few different options out there, the most popular size for a smog pump delete belt is 3/8” x 3-1/2”. This size will give you plenty of room to work with and will also be compatible with most aftermarket pulleys.

Now that you know what size belt you need, it’s time to start shopping around. There are a few different places you can buy belts online, but our personal favorite is Amazon. They have a great selection of belts in all different sizes, and they’re usually very reasonably priced.

Once you’ve found the perfect belt for your smog pump delete project, simply follow the instructions that come with it and you’ll be good to go!

Chevy 305 Smog Pump Delete

The Chevy 305 smog pump delete is a popular mod among car enthusiasts. This mod involves removing the smog pump from the engine bay, which can free up some extra space and weight. There are a few different ways to go about this mod, but the most common method is to simply disconnect the smog pump from its electrical connector and then remove it entirely.

Some people also like to block off the opening where the smog pump was mounted, just to be safe.

How to Remove Smog Pump on Chevy


Where is the Smog Pump Located?

The smog pump is located in the engine compartment, near the front of the vehicle. It is usually mounted on the firewall or fender, and has a hose that connects to the exhaust system. The pump forces air through the system and out the tailpipe, which helps to reduce emissions.

Is an Air Pump the Same As a Smog Pump?

An air pump is a mechanical device that pumps air into a chamber or container. A smog pump, on the other hand, is an electrical device that sucks air out of a room or container.

How Do You Remove Smog?

Smog is a type of air pollution that is formed when sunlight reacts with emissions from cars and power plants. Smog can cause a range of health problems, including respiratory infections, eye irritation, and headaches. There are a few things you can do to reduce smog in your area:

-Drive less often or carpool when possible -Avoid idling your car engine -Make sure your car is properly tuned up

How Do You Test a Smog Pump?

You can test a smog pump by starting the engine and letting it idle. Then, check the vacuum hose that goes from the carburetor to the smog pump. If there is no vacuum, then the smog pump is not working correctly.


Assuming you would like a summary of the blog post titled “How to Remove Smog Pump on Chevy”, the following is a brief summary. The blog post explains how to remove a smog pump on a Chevy. It begins by explaining that the smog pump is located on the front of the engine, near the water pump.

The author then provides step-by-step instructions for removing the smog pump, including disconnecting the electrical connector and hoses, and removing the bolts that hold it in place. Finally, the author offers some tips for reinstalling the smog pump, such as making sure all hoses are properly connected and tightening all bolts securely.

Leave a Reply

Your email address will not be published. Required fields are marked *