Skip to content

How to Preserve Deer Hooves

To preserve deer hooves, first gently clean them with a mild soap and warm water. Rinse the hooves thoroughly to remove any remaining dirt or debris. Next, apply a thick layer of petroleum jelly to each hoof and allow it to soak in for about an hour.

After that, cover the entire hoof with craft glue and let it dry overnight. Once it has dried completely, spray the entire area with several coats of clear sealant spray paint to protect against cracking or fading due to weathering. Finally, store the preserved deer hooves in a cool dark place away from moisture and direct sunlight so they will stay looking their best over time.

  • Clean the Hooves: Before beginning the process of preserving deer hooves, you must ensure that they are clean
  • Make sure to use a brush and soap to scrub away any dirt or debris from the hoove before proceeding with preservation
  • Soak in Bleach Water: To help preserve and disinfect the deer hoof, soak it in bleach water for at least 30 minutes prior to further processing
  • Create a solution using 9 parts water and 1 part bleach and place your hooves inside until finished soaking
  • Dry Thoroughly: After soaking, take out each of your deer hooves one-by-one and dry them off thoroughly with a cloth or paper towel until there is no more moisture left on them whatsoever
  • Apply Preservative Coat: Now that your deer hoof is completely dry, you can begin applying an even coat of preservative all over it by using either spray paint or oil based sealant such as polyurethane varnish or lacquer finish spray paint which will protect against fading due to sunlight exposure as well as other environmental factors like humidity levels etc
  • Allow this coating time to set according to manufacturer’s instructions before continuing onto next step
  • 5 Seal With Glue/Wax : The final step involves sealing up each individual deer phoeve with either glue/wax combination – first apply an even layer of hot wax onto each surface followed by brushing on thin layer superglue over top (optional)
  • This will make sure that moisture does not penetrate into cracks crevices while still allowing air circulation so that preserved nature look lasts longer without discoloring too quickly!

How to Mount Deer Feet

Mounting deer feet is a great way to commemorate and remember your hunting adventures. It can be done in three easy steps. First, you will need to preserve the feet by soaking them in a solution of water and formaldehyde for several days.

Secondly, you must prepare the mount board by tracing the outline of the foot on it before cutting it out with a jigsaw or band saw. Finally, use hot glue to attach the foot onto its prepared mount board, making sure that all surfaces are properly sealed and secured together. With these simple steps, you can easily create an impressive display piece from your game!

How to Dry Deer Legs for Dogs

One way to dry deer legs for dogs is by air-drying them. To do this, cut the meat off of the bone and remove any connective tissue or fat. Place the pieces on a wire rack in an area with good ventilation and away from direct sunlight.

Leave the pieces in place until they are almost dry, then turn over each piece so that both sides get dried evenly. Once all of the moisture has been removed, store your air-dried deer legs in an airtight container until you’re ready to serve them to your pup!

Removing Deer Hooves

Removing deer hooves is a relatively straightforward process that requires few tools. The most important tool needed for the task is a sharp, heavy-duty knife or pair of scissors. Additionally, it helps to have some leather gloves and an animal hide stretcher, which will make removing the hooves easier and less messy.

Once the necessary supplies are gathered, you can begin by making an incision around the ankle of the deer in order to separate it from its foot. Afterward, you can cut through any remaining tissue in order to remove each individual hoof cleanly.

How to Preserve Hooves

Preserving hooves is a great way to make sure that they last for years. You should start by removing any dirt or debris from the surface of the hoof, and then drying it off with a cloth. Once dry, you can use an oil-based product to protect against moisture and wear.

Make sure to cover all surfaces of the hoof, as well as its underside. Finally, apply a protective wax or lacquer to help seal in the preservation product and keep out dust and debris.

Boiling Deer Hooves

Boiling deer hooves is a traditional practice in many cultures and involves boiling the hooves of a freshly killed deer. This process helps to soften the cartilage, tendons, and ligaments for use in making glue or other products. The boiled hooves can also be used as an ingredient in soup or stew recipes because they provide flavor and nutrition.

Boiling deer hooves is not only important from a cultural standpoint but it also allows us to make use of all parts of the animal while respecting its life and respecting nature’s resources.

How to Preserve Deer Hooves


Can You Preserve Deer Hooves?

Preserving deer hooves is a great way to remember a hunting trip or special event. Many hunters like to preserve the hooves of their kills as mementos, and there are several different methods for doing this. One popular technique is by using salt and alum, which helps draw out moisture from the hoof while also preserving its shape.

You can also use glycerin or borax to lightly coat the hoof before adding it to a jar of rubbing alcohol. This will kill any bacteria present on the surface and help keep it preserved for years without fading or deteriorating over time. If you want an even more detailed preservation process, you can take a cast of the entire foot in plaster or wax before submerging it into a jar filled with liquid preservative such as formaldehyde-salt solution.

No matter what method you choose, preserving deer hooves is an easy way to commemorate your hunting trips and keep memories alive forever!

What Can You Do With Deer Hooves?

Deer hooves are surprisingly versatile, and can be used for a variety of different things. Some people use deer hooves as an ingredient in crafts; for example, they can be strung together to create decorative wind chimes or wall hangings. Others will grind down the hoof into a powder that can be used as a fertilizer or soil additive.

Deer hooves can also be boiled down to make gelatine, which is commonly used in cooking and baking applications. Finally, some hunters save the antlers from their kills to make jewelry such as necklaces and earrings – deer hooves provide the perfect base for these accessories!

How Do You Clean Deer Feet?

Cleaning deer feet is a necessary task for hunters who want to keep the meat fresh and free from bacteria. It is important to handle the feet carefully so that you don’t damage them, as this will make it harder to prepare them later on. To begin, remove any fur from the feet using scissors or a knife.

Once all of the fur has been removed, use a cloth dipped in warm water and soap to scrub away dirt and debris. Rinse with clean water after scrubbing and allow the feet to dry completely before handling further. For added protection against bacteria growth, soak the cleaned deer feet in a solution of one part vinegar mixed with eight parts warm water for at least an hour before continuing with preparation steps such as skinning or tanning.

Following these steps will ensure your deer’s feet are properly cared for while keeping its meat safe!

How Do You Preserve Deer Feet With Borax?

Preserving deer feet with borax is an old-fashioned way to make a trophy or decorative item. To begin, you will need the following supplies: Borax powder, large container or bucket, water, and a pair of clean deer feet. Start by filling your container with enough warm water to completely submerge the deer feet.

Measure out 1 cup of Borax powder for every gallon of water and pour it into the container. Make sure that all of the powder dissolves before adding in the deer feet; this will take several minutes. Once dissolved, gently add in one foot at a time making sure they are fully submerged in liquid throughout their entirety.

Allow them to soak overnight (minimum 12 hours) then remove and rinse off any extra residue on each foot using cold running water from a faucet or hose pipe prior to drying them off completely with paper towels or cloth rags. After they have dried off place them in direct sunlight for up to two days until they reach desired colorations/darkening effects that you desire before finally displaying your preserved masterpiece!

Deer feet taxidermy! Very unusual whitetail feet!


The process of preserving deer hooves is relatively simple and requires minimal materials. With the right supplies and a few helpful tips, anyone can have their own unique mementos from a successful hunt. Whether you make them as wall decorations or jewelry components, preserved deer hooves are sure to be conversation starters for years to come.

Leave a Reply

Your email address will not be published. Required fields are marked *