Skip to content

How to Find Axle Ratio from Vin Number

There are a few different ways that you can find your axle ratio from your VIN number. The first way is to look up the build sheet for your vehicle. This will give you all of the information about your car, including the axle ratio.

Another way is to contact your dealership and ask them to look up the information for you. Finally, you can also find this information online by searching for your VIN number and “axle ratio”. Whichever method you choose, make sure that you have the correct VIN number so that you can get accurate results.

How to find your differential gear ratio without stamps, tags, or tear down

  • Locate the VIN number on your vehicle
  • Find the 8th digit in the VIN number
  • This will be the axle ratio code
  • Compare the axle ratio code to a chart to determine the actual ratio

Chevy Gear Ratio from Vin Number

If you’re looking to find out what the gear ratio is on your Chevy vehicle, there’s no need to go digging through the owner’s manual or contacting a dealer. You can easily decode it from the Vehicle Identification Number (VIN). The tenth character of the VIN tells you the model year of the vehicle, and the eighth character indicates the engine type.

The ninth character is reserved for Chevrolet trucks and identifies the brake system as well as axle information. From this point, things get a little more complicated. The final six characters of a VIN are known as the Vehicle Identification Sequence (VIS).

This string of numbers and letters contains information about features like body style, restraint system, transmission type, and country of origin. It also includes data that helps identify each individual vehicle – like a serial number. Taken together, these 10 characters can tell you everything you need to know about your Chevy’s gear ratio.

How to Find Axle Ratio from Vin Number Dodge Ram 1500

If you own a Dodge Ram 1500, chances are you’re interested in finding out what your axle ratio is. Luckily, this information can be found right from your vehicle’s identification number (VIN). Here’s a step-by-step guide on how to do it:

1. Locate your VIN. This can be found on the driver’s side of the dash, near where the windshield meets the dashboard. 2. Write down or otherwise record your VIN somewhere safe.

You’ll need it for step 4. 3. Use an online VIN decoder tool to find out your axle ratio information from your VIN. We like VinDecoderz because it’s free and easy to use, but feel free to use whichever one you prefer.

4. input your VIN into the Decoder and hit “decode.” Scroll down until you see the section that says “axle,” and voila! There’s your axle ratio information, straight from the source.

Gmc Gear Ratio from Vin Number

If you’re a GMC owner, you may be wondering what your vehicle’s gear ratio is. Luckily, there’s a simple way to find out- all you need is your GMC’s VIN number! Your GMC’s VIN (vehicle identification number) can be found on the dash near the windshield, on the driver’s side door jamb, or on your insurance card.

Once you have your VIN, simply head to this website and enter it in the box labeled “Enter VIN.” You’ll then be given a list of possible gear ratios for your GMC model- all you have to do is select the one that matches your vehicle. That’s it!

Now you know what gear ratio your GMC has.

How to Find Gear Ratio by Vin Ford

If you’re looking to find the gear ratio of your Ford vehicle, the process is relatively simple. All you need is the Vehicle Identification Number (VIN) of your car, truck or SUV. Once you have that, just follow these steps:

1. Go to the Ford website and enter your VIN in the “Find Your Owner Manual” field. 2. Select the appropriate year for your vehicle from the drop-down menu. 3. Click on the “Owner Manuals” button.

This will take you to a page where you can download a PDF of your owner manual. The manual will include information on how to find your gear ratio. 4. Once you have downloaded and opened up the PDF, locate the section on “Vehicle Specifications.”

This is usually near the beginning or end of the document. 5 . Scroll down until you see a section labeled “Gear Ratios.”

This will list all of the different gear ratios for your particular Ford model year and trim level. That’s all there is to it!

How to Find Gear Ratio by Vin Ram

If you’re a gearhead, then you know that the gear ratio is one of the most important aspects of your vehicle. It’s what determines how much power is transferred from the engine to the wheels, and it can have a big impact on performance. But what if you don’t know what your gear ratio is?

Well, there’s an easy way to find out – by looking up your VIN (vehicle identification number). Here’s how it works: First, find your VIN.

It should be located on a plate on the driver’s side of the dash, near where the windshield meets the dash. If you can’t find it there, it may also be located on a plate on the driver’s doorjamb or in the owner’s manual. Next, use an online VIN decoder to look up your vehicle information.

You’ll need to enter your 17-digit VIN into the decoder, and it will return information about your vehicle including year, make, model, trim level, and transmission type. Once you have this information handy, go to an online gear ratio calculator (like this one from GearVault) and input your data. The calculator will then tell you what your gear ratio is.

That’s all there is to it! By using these simple steps, you can easily find out what gear ratio your vehicle has without even popping open the hood.

Vin Axle Decoder

If you’re looking to decode the VIN number on your vehicle’s axle, there are a few things you’ll need to know. The VIN (Vehicle Identification Number) is composed of 17 characters (digits and capital letters) that provide information about the vehicle. Here’s a quick breakdown of what each character in the VIN number means:

1.The first character identifies the country in which the vehicle was manufactured. 2.The second character identifies the manufacturer of the vehicle. 3.The third through eighth characters identify the vehicle model, engine type, and body style.

4.The ninth character is a check digit that helps to verify the accuracy of the VIN number. 5.The 10th character identifies the year that the vehicle was manufactured (e.g., “A” for 2010). 6.The 11th character identifies where the assembly plant is located (e.g., “U” for United States).

Axle Ratio by Vin Number Dodge

If you are looking to buy a new or used Dodge vehicle, it is important to know the axle ratio. The axle ratio is the ratio of the driveshaft revolutions to the wheel revolutions. This information can be found on the Vehicle Identification Number (VIN) plate.

The VIN is located on the driver’s side dash and is visible through the windshield. It is a 17-digit number that contains information about the vehicle such as make, model, year, engine size, and transmission type. To find out the axle ratio, you will need to locate the 8th digit of the VIN number.

This digit will be either a 1, 2, 3, or 4. If it is a 1, then this denotes a 3.23 axle ratio; if it’s a 2 then it’s a 3.55 axle ratio; if it’s a 3 then it means there’s a 3.73 axle ratio; and finally if it says 4 then this would mean that there’s a 4.10 axle ratio inside of your Dodge vehicle!

Edmunds Gear Ratio

Edmunds Gear Ratio If you’re not familiar with gear ratios, they basically determine how much torque is transferred from the engine to the wheels. A higher gear ratio means more torque is transferred, while a lower gear ratio means less torque is transferred.

So, what does this have to do with Edmunds? Well, they have a bunch of different calculators on their website that can help you figure out what your ideal gear ratio should be. There are a few things that you need to know before using the calculator though.

First, you’ll need to know the transmission type that’s in your car. Edmunds has a handy guide that can help you with that if you’re not sure. Once you know the transmission type, you’ll need to input the number of gears it has and the final drive ratio.

The final drive ratio is usually listed in your car’s owner’s manual. Once you have all of that information entered into the calculator, it will spit out some numbers for you. These numbers represent different gear ratios and how much torque each one will transfer from the engine to the wheels.

It’s up to you to decide which one is best for your driving style and needs. If you want more power out of your engine, go with a higher gear ratio. If fuel economy is more important to you, go with a lower gear ratio.

No matter what kind of driver you are or what your priorities are, Edmunds can help you find the perfect gear ratio for your car!

How to Find Axle Ratio from Vin Number


How Do I Find My Axle Ratio?

If you’re not sure what your axle ratio is, there are a few ways to find out. The easiest way is to check your owner’s manual. If you don’t have that handy, you can also look for a sticker on the inside of your driver’s doorjamb.

This sticker should list your vehicle’s make, model, year, and other important information, including the axle ratio. If you still can’t find your axle ratio, you can always contact your local dealership or automotive service center and they should be able to help you out.

How Do I Find My Chevy Axle Ratio?

There are a few different ways that you can go about finding the axle ratio for your Chevy. The easiest way is to simply look in your owner’s manual. All Chevrolet vehicles have the axle ratio listed in the specifications section of the manual.

If you don’t have your owner’s manual handy, you can also find the axle ratio on a sticker located on the door jamb of the driver’s side door. Another way to find out what axle ratio your Chevy has is by looking at the RPO code, which stands for Regular Production Option. This code is usually found on a decal located on either the inside of the glove box door or on the center console.

The last four digits of this code will tell you what gear ratio your vehicle has. For example, if the RPO code ends in 4L60, then that means your vehicle has a 3.42:1 gear ratio. If you’re still having trouble finding out what axle ratio your Chevy has, you can always contact a dealership or certified mechanic and they should be able to help you out.

How Can I Tell What Gear Ratio I Have Without Pulling Cover?

There are a few ways that you can tell what gear ratio you have without having to pull off the cover. One way is to look at the size of the ring gear. If it is a large diameter, then it is most likely a lower gear ratio.

Another way to tell is by looking at the number of teeth on the ring gear and comparing it to the number of teeth on the pinion gear. The higher the number of teeth, the higher the gear ratio.

How Do I Find Out What Gear Ratio My Car Has?

There are a few ways to find out what gear ratio your car has. One way is to look in the owner’s manual. Another way is to look for a sticker on the doorjamb or inside the glove compartment that lists the specs of your car, including the gear ratio.

Finally, you can check with your dealership or an online database of car specifications (such as


If you need to find your axle ratio and don’t have the door sticker or build sheet, you can use your VIN number. With a little bit of research, you can decode the VIN and find the axle ratio. The first step is to find your VIN number.

It should be located on the driver’s side dashboard, near the windshield. Once you have your VIN number, you will need to do some research to decode it. There are a few different ways to decode a VIN number, but the easiest way is to use an online tool like

Just enter your VIN number into the search box and hit enter. The site will return a report that includes your vehicle’s axle ratio.

Leave a Reply

Your email address will not be published. Required fields are marked *