Skip to content

How to Charge a Ps3 Controller

There are two ways to charge a PS3 controller. The first way is to connect the controller to the console using the USB cable that came with your PS3. The second way is to purchase a charging dock specifically for PS3 controllers.

  • Connect your PS3 controller to the console using a USB cable
  • Press and hold the PS button on the controller for about 5 seconds, until the light on the controller starts flashing
  • The controller is now charging
  • You can check the level of charge by pressing and holding the PS button for a few seconds; the color of the light will indicate how much charge is left
  • Red: Controller is low on battery and needs to be charged urgently
  • Yellow: Controller has enough power for casual gaming sessions but should be charged soon for extended use

How to Charge a Ps3 Controller Without Console

It is a common issue that PlayStation 3 controllers run out of battery faster than the console itself. When this happens, you’ll need to know how to charge a PS3 controller without the console. Here are some steps to do just that:

1) You’ll need a USB cable – any standard micro-USB will work. Plug one end into your controller and the other into an open port on your computer. 2) Your controller should automatically begin charging.

If it doesn’t, press and hold the PS button (the big one in the center) until it does. The light on the front of the controller will start blinking when it’s charging. 3) Keep your controller plugged in until it’s fully charged – this could take a couple of hours.

Once it’s done, unplug it from your computer and you’re good to go!

How to Charge Ps3 Controller With Wall Charger

It’s no secret that the PS3 controller is one of the most popular gaming controllers on the market. But did you know that you can charge your PS3 controller with a wall charger? That’s right, there is an official Sony Playstation 3 controller charging dock that will let you juice up your DualShock 3 while you are away from your console.

Here’s how it works: simply plug the charging dock into an AC outlet, and then place your PS3 controller onto the dock. The red LED light on the dock will illuminate to indicate that it is charging. Once the light turns green, your controller is fully charged and ready to go!

The great thing about this charger is that it uses standard mini USB cables, so if you happen to lose or damage the one that comes with the charger, you can easily find a replacement at any electronics store. Plus, it’s always handy to have an extra charging cable around for when friends come over to play multiplayer games. So there you have it – now you can keep your PS3 controller charged and ready for action even when you’re not near your console.

Pick up a Sony Playstation 3 Controller Charging Dock today and enjoy hours of uninterrupted gaming fun!

How Long Does It Take to Charge a Ps3 Controller

It takes about two hours to charge a PS3 controller. However, if you’re playing games that require quick button presses, it’s best to have a few charged controllers on hand so you don’t have to stop playing.

Ps3 Controller Not Charging

If your PS3 controller isn’t holding a charge, there are a few things you can try to get it up and running again. First, check the obvious things like making sure the controller is turned off and that the charging cable is firmly plugged in at both ends. If that doesn’t work, try resetting the controller by pressing the tiny reset button on the back near the L2 shoulder button.

If that doesn’t help, it’s time to check your PS3’s USB ports. One of them may be loose or not providing enough power. You can test this by plugging in another device like a USB flash drive or mouse and seeing if it works properly.

If all else fails, you may need to buy a new controller or send yours in for repairs.

Diy Ps3 Controller Charger

If your PS3 controller is starting to die on you in the middle of gaming sessions, or if you’re just looking for a way to save some money, then consider making your own PS3 controller charger. This is a pretty simple process that only requires a few supplies that you probably already have around the house. First, gather up your supplies.

You’ll need a 9V battery, some electrical tape, and a mini USB cable. If you don’t have a mini USB cable lying around, you can usually find them pretty cheap online or at electronics stores. Next, strip about an inch of the plastic off of each end of the USB cable.

Once that’s done, twist the two copper wires together and wrap them with electrical tape. Then, do the same thing with the two wires coming from the battery clip. Now it’s time to connect everything together.

Match up the positive wire from the battery clip (usually red) with the positive wire from the USB cable (also usually red). Do the same thing with the negative wires (usually black). Once everything is connected, wrap any exposed wires with electrical tape to avoid shorting anything out.

Your DIY PS3 controller charger is now complete! To use it, simply plug one end into your PS3 controller and then connect the other end to any standard USB port (like on your computer). The LED on your controller should light up indicating that it’s charging.

Let it charge for awhile and then enjoy hours of uninterrupted gaming!

How to Charge a Ps3 Controller


Can I Charge My Ps3 Controller With a Phone Charger?

No, you cannot charge your PS3 controller with a phone charger. Your PS3 controller must be charged with a Sony-certified charging device, such as the official PlayStation 3 charging dock or a USB charging cable connected to the PlayStation 3 console. Attempting to charge your PS3 controller with an unauthorized device may damage your controller and void your warranty.

How Can I Charge My Ps3 Controller Without the Console?

It is possible to charge your PS3 controller without the console. There are a few methods that you can use in order to do this. One method is to use a USB cable.

You can either use the USB cable that came with your PS3 or any other standard USB cable. Simply plug one end of the USB cable into your controller and the other end into a USB port on your computer or another power source. Another method is to purchase a separate charging dock for your controller.

These charging docks plugs into an outlet and then you place your controller on the dock in order to charge it.

How Do I Know If My Playstation 3 Controller is Charging?

Your PlayStation 3 controller needs to be charged in order to work properly. There are a few ways to tell if your controller is charging: The first way is to check the light on the front of the controller.

If the light is red, then your controller is charging. If the light is green, then your controller is fully charged. Another way to tell if your controller is charging is by checking the battery life indicator on the screen of your PlayStation 3 console.

If the battery life indicator shows that the controller has a full charge, then it means that your controller is indeed charged and ready to use. If you’re still unsure, you can always plug in your PlayStation 3 controller into your console via USB cable and check for yourself whether or not it’s receiving power from the console itself.

How Long Does It Take for a Ps3 Controller to Charge?

It typically takes two to three hours to charge a PS3 controller. The amount of time it takes to charge can vary depending on the type of controller and the battery. For example, the DualShock 3 controller has a built-in lithium-ion battery, while the Sixaxis controller uses AA batteries.

When using a standard USB port to charge, it usually takes longer to charge than when using an AC adapter.

Sony DualShock 3 Charging Station Unboxing


If your PS3 controller isn’t working properly, you may need to charge it. Here’s how to do it: 1. Connect the controller to the PS3 console using a USB cable.

2. The controller will start charging automatically. 3. Once the controller is fully charged, the light on the front of the controller will turn off.

Leave a Reply

Your email address will not be published. Required fields are marked *